Unlimited color embroidery uses a white recycled polyester thread that gets dyed with CMYK inks directly during the embroidery process. This allows for full-color designs without swapping threads, but it also requires a different approach than standard embroidery.
Here are the key things to consider to get the best results.
Design size and detail
- Keep elements at least 0.79" (2 cm) wide: Small elements aren’t just harder to stitch—they may prevent the color transition from happening at all. Each color blend needs at least 150–200 full stitches to complete, which typically requires 0.79" (2 cm) of space. Anything smaller can lead to visible color shifts or missing transitions.
- Avoid small or tightly spaced details: Even if the element is technically wide enough, intricate details and sharp color changes may still show visible transitions or distortion.
- Simplify your shapes: For smooth color transitions, large and filled areas work better than lots of smaller bits.
Gradients and text
- Avoid small or short gradients: Gradients need space to blend. In tight areas, the effect won’t look natural.
- For text, follow the stitch flow: Gradients work best when the stitch direction mimics handwriting. Serif or block fonts can result in choppy transitions unless stretched across multiple letters.
Color limitations
- No neon or metallic colors: The CMYK coloring process can’t produce bright neon or metallic shades. If your design uses these colors, consider switching to standard embroidery and checking available thread colors.
Fabric and garment choice
- Skip lightweight garments for complex designs: Small details and frequent color shifts require hiding extra thread (up to 11.8″ or 300 mm per section), which may cause puckering on thinner fabrics.
- Use outlines for solid shapes: Adding a simple outline around solid elements helps the final embroidery look cleaner and more polished.
Negative space
- Avoid exposed fabric gaps inside your design: Negative space can lead to uneven edges and fabric deformation. Instead, fill these areas with color or avoid small gradients in those spaces.
Hats and seams
- Don’t place designs over hat seams: Center seams are typically 0.4″–0.6″ (10–15 mm) wide and may misalign your design. Make sure design elements stay clear of these seams for best results.
Stitching techniques
- Avoid run stitching in multicolor designs: Run stitches (thin, single-line stitching) don’t work well with unlimited color embroidery. They can cause uneven color transitions and make the final design look low-quality. To avoid this, make sure any lines in your design are at least 0.05″ (1.3 mm) thick so they can be embroidered with a sturdier stitch type.
Quality assurance
If your design might not embroider well, our digitizers will make adjustments and place the order on hold until you approve the changes.